Waste King 103593 Pump/Motor Assembly 13 1/4" 8.3 Gallon

Special Price CAD$896.90 Regular Price CAD$1,250.40
In stock
SKU
103593
The Waste King 103593 Pump/Motor Assembly is built to handle all needs of improve management with its powerful and durable design. Made from steel while offering an 8.3-gallon capacity this part stands as an assembly that delivers durability and performance reliability in harsh environments. The pump operates between 115/230 V AC dual voltage which brings flexibility to different setup conditions. There is a motor speed of 1725 RPM that provides reliable performance because it operates without compromise operational efficiency. The assembly measures 13 1/4 inches in length which enables simple installation by fitting into small spaces without difficulty.

Dimensions

  • Length: 15.5 In
  • Width: 9.5 In
  • Height: 9.5 In
  • Weight: 24.65 lbs
https://partsfe.com/media/catalog/product/w/a/waste-king-103593-pump-motor-assembly-13-1-4-8-3-gallon-22078-2.jpg

Product Notes

  • Material: Steel
  • Length: 13 1/4" | 336 mm
  • Voltage: 115/230 V Ac
  • Phase: 1
  • Revolutions Per Minute: 1725
  • National Pipe Thread: 3/4"
  • Type: Maual Reset
  • Inlet: 3/4" Npt
  • Outlet: 3/4" Npt
  • Centers: 2 3/4 X 4 5/16" | 70 X 102 mm
Write Your Own Review
You're reviewing:Waste King 103593 Pump/Motor Assembly 13 1/4" 8.3 Gallon
Your Rating
Customer Questions
What maintenance is required for the Waste King 103593 Pump/Motor Assembly?

Regularly inspect and tighten all mounting bolts, and clean any debris or food particles from the inlet strainer. Check motor temperature and listen for unusual noise-replace if you detect signs of wear or overheating.

How do I install the Waste King 103593 Pump/Motor Assembly?

  • Disconnect electrical supply and ensure the system is depressurized or drained.
  • Remove the old pump‑motor unit by loosening its mounting hardware and disconnecting the ¾″ NPT inlet and outlet.
  • Align and mount the new 103593 assembly, using the same 2.75″ Ă— 4.3125″ center‑to‑center bolt pattern.
  • Reconnect the ¾″ NPT inlet/outlet fittings and reconnect the 115/230V wiring exactly as before.
  • Restore supply, test the pump, and verify a flow rate near 8.0 GPM.

What are common issues with the Waste King 103593 Pump/Motor Assembly?

Frequent problems include loss of flow due to clogged inlet strainers, motor overheating caused by overvoltage or continuous overload, and leaks at the pipe connections or worn seals.

What are the operating limitations for the Waste King 103593 Pump/Motor Assembly?

It runs on 115/230V, 1‑phase, at 1,725 RPM, with ¾″ NPT inlet/outlet, and delivers 8.0 GPM.

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More