Vulcan Hart 844133-00001 Oven Gas Safety Valve W/ NAT/LP Conversion Kit 3/4" FPT

SKU: 844133-00001 2-844133-00001 Brand:
Vulcan Hart
Availability:
In Stock
(0)
C$464.40 Price reduced from C$647.42
Save C$183.02
Have a Question? +1 (866) 863-0907

Specifications:

  • Nat/Lp Gas Safety Valve, 3/4" Fpt, 3.5" Wc, Adj 3-6" Wc
  • Range, 24V, 1/4" Cct Pilot, 3/16" M Gnd Tabs,
  • Honeywell # Vr8304M4507
  • Includes Nat To Lp Spring Kit # 51-1227
  • Vulcan Braising Pan Series E23, E40, G23, G40
  • Hatco Pmg-100 Pmg-200

Description

The Vulcan Hart 844133-00001 Gas Safety Valve is a component for oven equipment, which is responsible for safe gas flow regulation. This valve has a 3/4” FPT inlet and comes with a NAT/LP conversion kit so the valve can be used with both natural and liquid propane gases. This is possible through its ability to control pressure of the gas and close the supply of the gas in case of danger making it safe to use. Advantages include, increased functionality in the kitchen, safety compliance and suitability for use in a wide range of cooking processes; making it a staple in commercial kitchens.

Dimensions:

  • Weight: 1.3 lbs
  • Length: 15 in
  • Height: 6.6 in
  • Width: 11.4 in

HATCO:

02-21-023 02-21-023-00 02-21-025 02-21-025-00 02.21.023 02.21.023.00 02.21.025 02.21.025.00

HOBART:

00-844133-00001 00-844133-00002 44133-2 844133-00002 844133-1 844133-2

LINCOLN:

390093 LIN390093

MIDDLEBY MARSHALL:

32569

VULCAN HART:

00-844133-00001 00-844133-00002 44133-2 844133-00002 844133-1 844133-2

  • What maintenance is required for the Vulcan Hart 844133-00001 Gas Safety Valve?

    The Gas Safety Valve includes checking the 3/4″ FPT connections for leaks, ensuring pilot tubing and control wiring remain intact, and inspecting for dirt or corrosion in the valve body. Regularly leak-check with a gas-safe soap solution helps ensure safe, accurate operation.

  • How do I install the Vulcan Hart 844133-00001 Gas Safety Valve?

    • Shut off the main gas supply and power to the appliance.
    • Remove the existing valve, clean the 3/4″ FPT threads on the gas line.
    • Apply a gas-rated sealant or thread-seal tape on male threads.
    • Thread in the new valve hand-tight, then snug using a wrench (avoid over-tightening).
    • Connect the pilot line to the 1/4″ CCT pilot port and attach any 24 V control wiring to the 24 V terminals.
    • Restore gas supply and power, then perform a leak test and check that the burner ignites and holds gas properly.

  • What are common issues with the Vulcan Hart 844133-00001 Gas Safety Valve?

    Common problems include gas leaks due to insufficient sealing at the 3/4″ FPT threads, failure to hold open or release due to worn internal seats, and pilot-line blockages or degradation causing ignition or flame-holding issues. Incorrect spring setting may also cause improper gas regulation.

  • What are the operating limitations for the Vulcan Hart 844133-00001 Gas Safety Valve?

    This valve supports NAT or LP gas, uses a 3/4″ FPT inlet, accepts a 24V control signal, and regulates gas pressure in the adjustable range of approximately 3–6″ WC.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More