Cleveland FK113049 2-Stage Gas Valve Replacement Kit

The Cleveland FK113049 Gas Valve Replacement Kit should be checked periodically for clean gas passages, secure wiring, and proper burner response. Inspect for corrosion or debris that may restrict flow or delay ignition in Cleveland steamers or kettles.

• Shut off gas and power to the Cleveland unit.
• Remove access panels and label all wiring and gas connections.
• Disconnect gas piping, electrical leads, and mounting hardware.
• Remove the existing valve and position the new Cleveland FK113049 valve in place.
• Reconnect gas lines using proper sealant and ensure alignment.
• Reinstall electrical leads as originally configured.
• Restore gas and power, test for leaks, and confirm steady ignition and burner flame.

Common issues include valves failing to open due to worn solenoids, delayed ignition, or weak burner flame caused by internal blockage. Loose electrical connections or low control voltage can also disrupt valve performance.

Gas valves in this Cleveland line typically operate on low-voltage (often 24V) controls and handle low to medium manifold pressures used in steam kettles and steamers. A clean, stable gas supply is required to maintain consistent burner ignition.