BKI (Barbeque King) M0047 Fryer Motor/Pump Assmbly 115V/230V 1/3 HP 1Ph 1425/1725 RPM 1/2" FPT
Specifications:
- Motor/Pump Assmbly, [ 115V/230V, ] [ 1/3 Hp, ] [1Ph ]
- [1425/1725 RPM ] [ 1/2" Fpt ] [ 3" X 5" Mount Centers ]
- Includes Pump Seal # 32-1606
- Pump Only A3834, B-229, # 262816
- Motor Only Mb-137, # 681257
- Wiring Diagram Located On Inside Of Rear Cover
- Bk Industries Fryer
- Dean Fryer Mf-90/65, Mf-90A/65, Mf-90/(80,110,126,160,172)
- Mf-90A/(80,110,126,160,172), Series: 2424.&
- Mf-90U/80Bk With S/N Ending With Hc Or Hch,
- Mf-90-Bi(12,14,18,20).
- Decathalon Series (D20,D50,D60,D80)Super Cascade Filter
- Systems
- Pitco Fryer Filter: 18-2Wks, Ag14, Ag14S, F14Rs (1985 &
- Later), Sf50, E12, E14, E14B, E14X, E18, E18B, E7, E7B,
Description
Dimensions:
- Weight: 22.3 lbs
- Length: 11.5 in
- Height: 6.5 in
- Width: 7.25 in
BK INDUSTRIES:
BROASTER:
DEAN:
Step1: Turn off gas and disconnect the electrical power to the fryer.
Step2: Drain oil or water from the fryer to prevent spills.
Step3: Remove the old motor/pump assembly by disconnecting mounting hardware.
Step4: Install the new motor/pump assembly, reconnect piping, and secure all fasteners.
Step5: Restore power and test the pump operation to ensure proper circulation.
-
What Maintenance is required for the BKI M0047 Motor/Pump Assembly?
The Motor/Pump Assembly should have the pump strainer cleaned regularly to prevent flow restriction and inspect the motor strapping and wiring monthly for tightness and insulation damage.
-
How do I install the BKI M0047 Motor/Pump Assembly?
- Shut off power and disconnect oil/fryer fluid supply, allowing the system to cool.
- Remove the old motor/pump unit by disconnecting wiring and unbolting the mounting.
- Clean the mounting surface, remove old seal residue, and ensure alignment for new unit.
- Install the new assembly, secure the mounting bolts, connect oil/fryer lines to the ½" FPT ports, and hook up the wiring per diagram.
- Restore power and fluid supply, run a start-up cycle, check for proper flow, absence of leaks around the seal, and stable motor operation.
-
What are common issues with the BKI M0047 Motor/Pump Assembly?
Typical failures include clogged inlet or strainer reducing flow, motor overheating or failing due to blocked discharge, and leaks caused by worn pump seal.
-
What are the operating limitations for the BKI M0047 Motor/Pump Assembly?
It is rated for 1/3 HP, single-phase motor operation at 115/230V, 50/60 Hz, with 1/2″ FPT port connections, 3″×5″ mount centers, and RPM options of 1425/1725.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More
