Ultrafryer ULTR24A294 Fryer Pump/Motor Assembly 8.3 Gal 13-1/4"

SKU: ULTR24A294 2-ULTR24A294 Brand:
Ultrafryer
Availability:
In Stock
(0)
C$2,328.73 Price reduced from C$3,304.55
Save C$975.82
Have a Question? +1 (866) 863-0907

Specifications:

  • Material: Steel
  • Length: 13 1/4" | 336 mm
  • Voltage: 115/230 V Ac
  • Phase: 1
  • Revolutions Per Minute: 1725
  • National Pipe Thread: 3/4"
  • Type: Maual Reset
  • Inlet: 3/4" Npt
  • Outlet: 3/4" Npt
  • Centers: 2 3/4 X 4 5/16" | 70 X 102 mm

Description

The ULTR24A294 Pump/Motor Assembly is used to filter and circulate oil in fryers. It is 13 1/4” (336 mm) long and therefore suitable for different fryer configurations. This assembly is designed to fit some Ultrafryer models and facilitates the management of the oil. It has a single phase 115/230 V AC power supply and a rotating speed of 1725 RPM; it also has a manual reset button for safety. It is made of steel and is equipped with 3/4” NPT inlet and outlet that provide steady oil flow.

Dimensions:

  • Weight: 24.65 lbs
  • Length: 15.5 in
  • Height: 9.5 in
  • Width: 9.5 in

Step1: Turn off the power and allow fryer oil to cool.

Step2: Drain oil and remove the old pump/motor assembly.

Step3: Inspect the mounting area and inlet/outlet fittings.

Step4: Position the new pump/motor assembly in the correct orientation.

Step5: Secure with mounting bolts or brackets.

Step6: Reconnect wiring and fluid lines according to the diagram.

Step7: Power on and test the operation for proper flow and operation.

  • What maintenance is required for the Ultrafryer ULTR24A294 Pump/Motor Assembly?

    Regularly inspect the pump inlet screen and clear debris to maintain full flow. Check the motor for excessive heat or vibration and replace the assembly if flow drops below the rated 8.0 GPM or noise increases significantly.

  • How do I install the Ultrafryer ULTR24A294 Pump/Motor Assembly?

    • Disconnect power and allow the fryer oil to cool and be safely handled.
    • Drain or isolate the fry chamber to relieve pressure and remove old pump assembly.
    • Unbolt the existing pump/motor unit and disconnect the ¾″ NPT inlet and outlet connections.
    • Mount the new 24A294 assembly, aligning the mounting bolt centers and secure the unit.
    • Re‑connect the inlet/outlet piping ¾″ NPT, electrical wiring ensuring correct voltage 115/230V and grounding.
    • Refill the fryer oil to operating level, restore power and run a test pump cycle verifying approx 8.0 GPM flow and quiet operation.

  • What are common issues with the Ultrafryer ULTR24A294 Pump/Motor Assembly?

    Common issues include clogged inlet causing reduced flow, motor overload or failure when run under higher voltage, and leaking seals or fittings around the ¾″ NPT connections reducing pump efficiency.

  • What are the operating limitations for the Ultrafryer ULTR24A294 Pump/Motor Assembly?

    The unit is rated at 8.0 GPM, 1/3 HP, suited for 115/230V, single phase operation, uses ¾″ NPT inlet/outlet threads.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More