Southbend 1180866 Oven Safety Valve 1/2" FPT 3-1/8" WIDE 1/4" In/out Pilot CCT

Choose the best Commercial kitchen & Restaurant equipment parts and supplies from PartsFeCanada!

• Same Day Shipping

• Best Quality And Best Price

• Wide Range of Inventory

• Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at 866-863-0907 or [email protected]

Step1: Turn off the gas supply completely and ensure the oven is cool.

Step2: Remove the old safety valve carefully, keeping fittings intact.

Step3: Install the new valve in the correct orientation, ensuring proper alignment.

Step4: Tighten all fittings securely, but avoid over-torquing to prevent damage.

Step5: Check for leaks with soapy water and test the valve function before using the oven.

• What maintenance is required for the Southbend 1180866 Gas Safety Valve?

  Inspecting the valve for gas leaks, ensuring proper operation of the solenoid, and checking connections for corrosion. Periodic testing is essential to confirm the valve shuts off gas flow accurately in case of flame failure.

• How do I install the Southbend 1180866 Gas Safety Valve?

  • Turn off the gas supply and disconnect power to the appliance.
  • Remove the existing gas safety valve from the gas line.
  • Install the new valve, ensuring proper alignment with inlet and outlet fittings.
  • Connect electrical terminals for the solenoid according to the wiring diagram.
  • Restore gas and power, then test for proper operation and leak-free performance.

• What are common issues with the Southbend 1180866 Gas Safety Valve?

  Common issues include failures to open or close due to dirt or debris, solenoid coil burnout, and leaks from worn seals. Improper electrical connection can also prevent the valve from actuating.

• Which Southbend models are compatible with the Southbend 1180866 Gas Safety Valve?

  This gas safety valve is compatible with Southbend range models 424E, 436A, 436A‑1GL, and 436A‑2GL.